Browsing by Author "Derawi, Mohammad"
Now showing 1 - 7 of 7
Results Per Page
Sort Options
Article A Radio Frequency Fingerprinting-Based Aircraft Identification Method Using ADS-B Transmissions(Aerospace, 2024-03-17) Gürer, Gürsu; Dalveren, Yaser; Kara, Ali; Derawi, MohammadThe automatic dependent surveillance broadcast (ADS-B) system is one of the key components of the next generation air transportation system (NextGen). ADS-B messages are transmitted in unencrypted plain text. This, however, causes significant security vulnerabilities, leaving the system open to various types of wireless attacks. In particular, the attacks can be intensified by simple hardware, like a software-defined radio (SDR). In order to provide high security against such attacks, radio frequency fingerprinting (RFF) approaches offer reasonable solutions. In this study, an RFF method is proposed for aircraft identification based on ADS-B transmissions. Initially, 3480 ADS-B samples were collected by an SDR from eight aircrafts. The power spectral density (PSD) features were then extracted from the filtered and normalized samples. Furthermore, the support vector machine (SVM) with three kernels (linear, polynomial, and radial basis function) was used to identify the aircraft. Moreover, the classification accuracy was demonstrated via varying channel signal-to-noise ratio (SNR) levels (10–30 dB). With a minimum accuracy of 92% achieved at lower SNR levels (10 dB), the proposed method based on SVM with a polynomial kernel offers an acceptable performance. The promising performance achieved with even a small dataset also suggests that the proposed method is implementable in real-world applications.Article Business Intelligence Strategies, Best Practices, and Latest Trends: Analysis of Scientometric Data from 2003 to 2023 Using Machine Learning(Sustainability, 2023-06-21) Gürcan, Fatih; Ayaz, Ahmet; Menekşe Dalveren, Gonca Gökçe; Derawi, MohammadThe widespread use of business intelligence products, services, and applications piques the interest of researchers in this field. The interest of researchers in business intelligence increases the number of studies significantly. Identifying domain-specific research patterns and trends is thus a significant research problem. This study employs a topic modeling approach to analyze domain-specific articles in order to identify research patterns and trends in the business intelligence field over the last 20 years. As a result, 36 topics were discovered that reflect the field’s research landscape and trends. Topics such as “Organizational Capability”, “AI Applications”, “Data Mining”, “Big Data Analytics”, and “Visualization” have recently gained popularity. A systematic taxonomic map was also created, revealing the research background and BI perspectives based on the topics. This study may be useful to researchers and practitioners interested in learning about the most recent developments in the field. Topics generated by topic modeling can also be used to identify gaps in current research or potential future research directions.Article Convolutional Neural Network-Based Vehicle Classification in Low-Quality Imaging Conditions for Internet of Things Devices(Sustainability, 2023-11-24) Maiga, Bamoye; Dalveren, Yaser; Kara, Ali; Derawi, MohammadVehicle classification has an important role in the efficient implementation of Internet of Things (IoT)-based intelligent transportation system (ITS) applications. Nowadays, because of their higher performance, convolutional neural networks (CNNs) are mostly used for vehicle classification. However, the computational complexity of CNNs and high-resolution data provided by high-quality monitoring cameras can pose significant challenges due to limited IoT device resources. In order to address this issue, this study aims to propose a simple CNN-based model for vehicle classification in low-quality images collected by a standard security camera positioned far from a traffic scene under low lighting and different weather conditions. For this purpose, firstly, a new dataset that contains 4800 low-quality vehicle images with 100 × 100 pixels and a 96 dpi resolution was created. Then, the proposed model and several well-known CNN-based models were tested on the created dataset. The results demonstrate that the proposed model achieved 95.8% accuracy, outperforming Inception v3, Inception-ResNet v2, Xception, and VGG19. While DenseNet121 and ResNet50 achieved better accuracy, their complexity in terms of higher trainable parameters, layers, and training times might be a significant concern in practice. In this context, the results suggest that the proposed model could be a feasible option for IoT devices used in ITS applications due to its simple architecture.Article Digital Transformation Strategies, Practices, and Trends: A Large-Scale Retrospective Study Based on Machine Learning(Sustainability, 2023-05-03) Gürcan, Fatih; Boztaş, Gizem Dilan; Menekşe Dalveren, Gonca Gökçe; Derawi, MohammadThe purpose of this research is to identify the areas of interest, research topics, and application areas that reflect the research nature of digital transformation (DT), as well as the strategies, practices, and trends of DT. To accomplish this, the Latent Dirichlet allocation algorithm, a probabilistic topic modeling technique, was applied to 5350 peer-reviewed journal articles on DT published in the last ten years, from 2013 to 2022. The analysis resulted in the discovery of 34 topics. These topics were classified, and a systematic taxonomy for DT was presented, including four sub-categories: implementation, technology, process, and human. As a result of time-based trend analysis, “Sustainable Energy”, “DT in Health”, “E-Government”, “DT in Education”, and “Supply Chain” emerged as top topics with an increasing trend. Our findings indicate that research interests are focused on specific applications of digital transformation in industrial and public settings. Based on our findings, we anticipate that the next phase of DT research and practice will concentrate on specific DT applications in government, health, education, and economics. “Sustainable Energy” and “Supply Chain” have been identified as the most prominent topics in current DT processes and applications. This study can help researchers and practitioners in the field by providing insights and implications about the evolution and applications of DT. Our findings are intended to serve as a guide for DT in understanding current research gaps and potential future research topics.Article LPWAN Cyber Security Risk Analysis: Building a Secure IQRF Solution(Sensors, 2023-02-12) Bouzidi, Mohammed; Amro, Ahmed; Dalveren, Yaser; Cheikh, Faouzi Alaya; Derawi, MohammadLow-power wide area network (LPWAN) technologies such as IQRF are becoming increasingly popular for a variety of Internet of Things (IoT) applications, including smart cities, industrial control, and home automation. However, LPWANs are vulnerable to cyber attacks that can disrupt the normal operation of the network or compromise sensitive information. Therefore, analyzing cybersecurity risks before deploying an LPWAN is essential, as it helps identify potential vulnerabilities and threats as well as allowing for proactive measures to be taken to secure the network and protect against potential attacks. In this paper, a security risk analysis of IQRF technology is conducted utilizing the failure mode effects analysis (FMEA) method. The results of this study indicate that the highest risk corresponds to four failure modes, namely compromised end nodes, a compromised coordinator, a compromised gateway and a compromised communication between nodes. Moreover, through this methodology, a qualitative risk evaluation is performed to identify potential security threats in the IQRF network and propose countermeasures to mitigate the risk of cyber attacks on IQRF networksArticle Mobile Application Software Requirements Specification from Consumption Values(Electronics, 2023-03-28) Derawi, Mohammad; Menekşe Dalveren, Gonca Gökçe; Çağıltay, Nergiz ErcilIn today’s society, mobile applications are becoming more popular and providing several advantages. However, users will resist using a product regardless of how well-tested or solid it is if the wrong requirements are implemented. Understanding the factors that influence the purchase of mobile applications can provide useful information for mobile application design and development. Hence, the purpose of this research is to better understand the impact of consumption values on customers in order to identify the software requirements for a mobile application. This study analyzes the possible behavioral changes of similar groups of university students in a five-year period. For this purpose, a questionnaire is administered to engineering faculty students in 2017 (46 females and 66 males) and 2021 (45 females and 90 males) to better understand customer behavioral changes. The findings highlight the significance of conditional value in customer behavior when purchasing mobile applications. Even though the other consumption values were found to have a negligible effect, there is some evidence indicating that the impact of consumption values on different target customer groups may vary considering their gender and familiarity with apps. Further research needs to be conducted to better understand the possible impact of age, cultural differences, education levels, and special considerations such as visually impaired people. Therefore, this study encourages mobile application designers and developers to raise awareness for the effect of consumption values such as conditional value on their customers’ mobile application purchasing behaviors. The possible impact of the consumption values needs to be deeply understood, specifically for the target customer groups, and it should be considered in the software requirements specification (SRS), which is one of the important principles that allow software under consideration for development to function. As a result, a better understanding of consumption values will help developers design and develop better applications by specifying software requirements and marketing strategies.Article Towards mmWave Altimetry for UAS: Exploring the Potential of 77 GHz Automotive Radars(Drones, 2024-03-11) Awan, Maaz Ali; Dalveren, Yaser; Kara, Ali; Derawi, MohammadPrecise altitude data are indispensable for flight navigation, particularly during the au tonomous landing of unmanned aerial systems (UASs). Conventional light and barometric sensors employed for altitude estimation are limited by poor visibility and temperature conditions, respec tively, whilst global positioning system (GPS) receivers provide the altitude from the ean sea level (MSL) marred with a slow update rate. To cater to the landing safety requirements, UASs necessitate precise altitude information above ground level (AGL) impervious to environmental conditions. Radar altimeters, a mainstay in commercial aviation for at least half a century, realize these requirements through minimum operational performance standards (MOPSs). More recently, the proliferation of 5G technology and interference with the universally allocated band for radar altimeters from 4.2 to 4.4 GHz underscores the necessity to explore novel avenues. Notably, there is no dedicated MOPS tailored for radar altimeters of UASs. To gauge the performance of a radar al timeter offering for UASs, existing MOPSs are the de facto choice. Historically, frequency-modulated continuous wave (FMCW) radars have been extensively used in a broad spectrum of ranging ap plications including radar altimeters. Modern monolithic millimeter wave (mmWave) automotive radars, albeit designed for automotive applications, also employ FMCW for precise ranging with a cost-effective and compact footprint. Given the technology maturation with excellent size, weight, and power (SWaP) metrics, there is a growing trend in industry and academia to explore their efficacy beyond the realm of the automotive industry. To this end, their feasibility for UAS altimetry remains largely untapped. While the literature on theoretical discourse is prevalent, a specific focus on mmWave radar altimetry is lacking. Moreover, clutter estimation with hardware specifications of a pure look-down mmWave radar is unreported. This article argues the applicability of MOPSs for commercial aviation for adaptation to a UAS use case. The theme of the work is a tutorial based on a simplified mathematical and theoretical discussion on the understanding of performance metrics and inherent intricacies. A systems engineering approach for deriving waveform specifications from operational requirements of a UAS is offered. Lastly, proposed future research directions and insights are included.