Turhan, CihanAtalay, Ali SerdarAkkurt, Gülden Gökçen2023-12-082023-12-082023-06-16http://hdl.handle.net/20.500.14411/18552071-1050https://doi.org/10.3390/su15129674Open Access, Published by Sustainability, https://doi.org/10.3390/su15129674, Cihan Turhan, Department of Energy Systems Engineering, Faculty of Engineering, Atılım University, 06830 Ankara, Türkiye, Ali Serdar Atalay, BitNet Corporation, 34782 Istanbul, Türkiye, Gulden Gokcen Akkurt, Department of Energy Systems Engineering, Faculty of Engineering, Izmir Institute of Technology, 35430 Izmir, Türkiye.Urban heat island (UHI) is a zone that is significantly warmer than its surrounding rural zones as a result of human activities and rapid and dense urbanization. Excessive air temperature due to the UHI phenomenon affects the energy performance of buildings and human health and contributes to global warming. Knowing that most of the building energy is consumed by residential buildings, therefore, developing a framework to mitigate the impact of the UHI on residential building energy performance is vital. This study develops an integrated framework that combines hybrid micro-climate and building energy performance simulations and multi-criteria decision-making techniques. As a case study, an urban area is analyzed under the Urban GreenUP project funded by the European Union’s Horizon 2020 Programme. Four different strategies to mitigate the UHI effect, including the current situation, changing the low-albedo materials with high-albedo ones, nature-based solutions, and changing building façade materials, are investigated with a micro-climatic simulation tool. Then, the output of the strategies, which is potential air temperature, is used in a dynamic building energy simulation software to obtain energy consumption and thermal comfort data of the residential buildings in the case area. Finally, a multi-criteria decision-making model, using real-life criteria, such as total energy consumption, thermal comfort, capital cost, lifetime and installation flexibility, is used to make a decision for decreasing the UHI effect on residential energy performance of buildings. The results showed that applying NBSs, such as green roofs and changing existing trees with high leaf area density ones, have the highest ranking among all mitigation strategies. The output of this study may help urban planners, architects, and engineers in the decision-making processes during the design phase of urban planning.enThermal comfort, building energy performance, urban heat islands, integrated multi-decision-making toolsArticle